70
f Using both hands, slide the manual feed
paper guides to the width of the paper
that you are going to use.
g Using both hands, put one piece of A4 or
Letter size paper in the manual feed slot
until the top edge of the paper touches
the paper feed roller. When you feel the
machine pull in the paper, let go. The
machine will start the Drum Cleaning
process.
Note
• The machine makes a mechanical noise
during the Drum Cleaning process
because the machine rotates the drum in
reverse. This noise is not due to a
malfunction of the machine.
• DO NOT put more than one sheet of paper
in the manual feed slot at any one time, as
it may cause a jam.
• If the paper in the manual feed slot is not
A4 or Letter size, the machine will stop the
Drum Cleaning process and eject the
paper.
• Make sure that the paper is straight and in
the correct position in the manual feed
slot. If it is not, it may not be fed correctly,
resulting in a paper jam.
• DO NOT close the back cover (face-up
output tray) during the Drum Cleaning
process. The machine will stop the Drum
Cleaning process and it may cause a
paper jam.
h When the machine has finished
cleaning, the machine returns to Ready
mode.
i Repeat steps e to h two more times
using a new blank sheet of paper each
time. Upon completion please discard
the used paper.
j Close the back cover (face-up output
tray) and the manual feed slot cover.
If the problem has not been solved, follow the
steps below:
a Open the front cover, and then leave the
machine turned on for 10 minutes for the
internal fan to cool the internal parts of
the machine that are extremely hot.