Filter
Top Products
100
Setting Dial Tone detection B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial as
soon as it detects a dial tone. This setting can
save a small amount of time when sending a
fax to many different numbers. If you change
the setting and start having problems with
dialling you should change back to the default
No Detection setting.
a Press Menu, 0, 5.
Press Menu, 0, 4 (for New Zealand).
b Press a or b to choose Detection or
No Detection.
Press OK.
c Press Stop/Exit.
Telephone line interference/
VoIP B
If you are having difficulty sending or
receiving a fax due to possible interference
on the telephone line, we recommend that
you adjust the equalization for compatibility to
reduce the modem speed for fax operations.
a Press Menu, 2, 0, 1.
b Press a or b to choose Basic(for
VoIP), Normal or High (FAX-2840,
FAX-2950 and MFC-7290).
Basic(for VoIP) cuts the modem
speed to 9600 bps. When you
change the Compatibility to
Basic(for VoIP), the ECM
feature is only available for fax
sending.
For a standard telephone line: If you
regularly experience interference on
your standard telephone line try this
setting.
If you are using VoIP: VoIP service
providers offer fax support using
various standards. If you regularly
experience fax transmission errors
try this setting.
Normal sets the modem speed at
14400 bps.
High sets the modem speed at
33600 bps (FAX-2840, FAX-2950
and MFC-7290).
Press OK.
c Press Stop/Exit.
Note
VoIP (Voice over IP) is a type of phone
system that uses an Internet connection,
rather than a traditional phone line.