Brother FAX 2950 Fax Machine User Manual


 
Chapter 7
40
Remote Deactivation Code 7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T ring
(pseudo/double-ring) after the initial ring
delay. If you pick up the call on an extension
telephone you can turn the F/T ring off by
pressing #51 (#91 for New Zealand) (make
sure you press this between the rings).
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the machine by lifting the
machine’s handset.
Turning on the Remote Codes 7
You need to turn Remote Activation Code
setting to on to use the Fax Receive Code
and Remote Deactivation Code.
a Make sure you are in FAX mode .
b Press Menu 2, 1, 4.
c Press a or b to choose On.
Press OK.
d If you do not want to change the Remote
Activation Code, press OK.
e If you do not want to change the Remote
Deactivation Code, press OK.
f Press Stop/Exit.
Changing the Remote Codes 7
The preset Remote Activation Code is l51
(l91 for New Zealand). The preset Remote
Deactivation Code is #51 (#91 for New
Zealand). If you are always disconnected
when accessing your External TAD, try
changing the three-digit remote codes, for
example ### and 555.
a Make sure you are in FAX mode .
b Press Menu, 2, 1, 4.
c Press a or b to choose On or Off.
Press OK.
d If you chose On in step c, enter the new
Remote Activation Code.
Press OK.
e Enter the new Remote Deactivation
Code.
Press OK.
f Press Stop/Exit.