Filter
Top Products
Accessory List
A - 1
Accessory List
*For optimum print quality and product performance within
published specifications, use only the correct Brother replacement
ribbon.
Model Name Description
PC-75 Print Cartridge (1 set per box)
PC-71RF 1 re-fill for use in PC-75 Print Cartridge
PC-72RF 2 re-fills for use in PC-75 Print Cartridge
PC-74RF 4 re-fills for use in PC-75 Print Cartridge
Change Receive Mode
Press 9 8.
then for TA D, press 1.
FAX/TEL, press 2.
FAX ONLY, press 3.
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1
Press Menu/Set, 8, 2.
2
Enter a three-digit number. The cannnot be changed.
3
Press Menu/Set.
4
Press Stop/Exit.
Using Remote Access Code
1
Dial your machine phone number from a touch tone
phone.
2
Enter your Remote Control Access Code (3 digits
followed by ) after the beep.
3
Your machine signals the kinds of messages received:
1 long beeps – Fax message(s)
No beeps – no messages
4
After 2 short beeps, enter a command.
5
Press 9 0 to reset your machine when you finish.
6
Hang up.
REMOTE CONTROL ACCESS CARD
Retrieve a Fax
Press 9 6.
then to Print a Memory Status List press
1, then enter the number of remote
fax machine, and then # #. After
the beep, hang up and wait.
Retrieve all faxes press 2, then
enter the number of remote fax
machine, and then # #. After the
beep, hang up and wait.
Erase all fax messages press 3.
Check Receiving Status
Press 9 7.
then for Fax message, press 1.
Voice message, press 2.
1 long beeps – received messages
3 short beeps – no messages
Change Receive Mode
Press 9 8.
then for TAD:MSG MGR, press 1.
FAX/TEL, press 2.
FAX ONLY, press 3.
Exit Remote Operation
Press 9 0.
Using Remote Access Code
1
Dial your fax machine phone number from a
touch tone phone.
2
Enter your Remote Access Code
(3 digits followed by ) after the beep.
3
The fax machine signals the kinds of
messages received:
1 long beep – Fax message(s)
2 long beeps – Voice message(s)
3 long beeps – Fax and Voice message(s)
No beeps – no messages
4
After 2 short beeps, enter a command.
5
Press 9 0 to reset the machine when you
finish.
6
Hang up.
MESSAGE MANAGER
REMOTE CONTROL ACCESS CARD
(For FAX-T104)
(For FAX-T106)
1
14
5 6