Filter
Top Products
GT-3 Series
7. Troubleshooting
130
Error
code
Message Meaning Solution
1200 Exchange Maintenance Parts
1201 Exchange Maintenance Parts
Needs to exchange the Maintenance
Parts and to clean the printer.
Exchange the Maintenance Parts and clean the inside of
the printer. See "6-1. Replacing Consumables".
1210 Exhaust Fan Stop The Fan to exhaust ink mist is stopped. **
2000 NO INK Black Black Ink Cartridge is not installed. Install a Black Ink Cartridge.
2001 NO INK Magenta Magenta Ink Cartridge is not installed. Install a Magenta Ink Cartridge.
2002 NO INK Cyan Cyan Ink Cartridge is not installed. Install a Cyan Ink Cartridge.
2003 NO INK Yellow Yellow Ink Cartridge is not installed. Install a Yellow Ink Cartridge.
2004 NO INK White-1 White 1 Ink Cartridge is not installed.
2005 NO INK White-2 White 2 Ink Cartridge is not installed.
2006 NO INK White-3 White 3 Ink Cartridge is not installed.
2007 NO INK White-4 White 4 Ink Cartridge is not installed.
Install a White Ink Cartridge.
2020 EMPTY Black Black Ink Cartridge ran out of ink. Replace to a new Black Cartridge.
2021 EMPTY Magenta Magenta Ink Cartridge ran out of ink. Replace to a new Magenta Cartridge.
2022 EMPTY Cyan Cyan Ink Cartridge ran out of ink. Replace to a new Cyan Cartridge.
2023 EMPTY Yellow Yellow Ink Cartridge ran out of ink. Replace to a new Yellow Cartridge.
2024 EMPTY White-1 White 1 Ink Cartridge ran out of ink.
2025 EMPTY White-2 White 2 Ink Cartridge ran out of ink.
2026 EMPTY White-3 White 3 Ink Cartridge ran out of ink.
2027 EMPTY White-4 White 4 Ink Cartridge ran out of ink.
Replace to a new White Cartridge.
2041 No Wiper Cleaner (CMYK)
The Wiper Cleaner for CMYK is not
installed.
Install the Wiper Cleaner to the CMYK side.
2042
No Wiper Cleaner (White)
The Wiper Cleaner or White is not
installed.
Install the Wiper Cleaner to the White side
2050 Temp Low
The ambient temperature is under the
operative temperature rage.
Raise the room temperature.
2051 Temp High
The ambient temperature is over
operative temperature rage.
Drop the room temperature.
2070
O
bstacle on the Platen
The Clearance Sensor detected an
obstacle on the Platen (or the media) in
loading the Platen.
Remove the obstacle, flat the platen surface and then
press OK Button.
2100 USB flash drive Not Ready
USB flash drive is not properly
mounted.
Re-mount the USB flash drive. Confirm the spec and
type of the USB flash drive. See " 7-1. Solving Printer
Problems".
2101 Not Enough Area
The USB flash drive does not have
enough area for saving.
Check the free space of the USB flash drive with PC.
Mount a USB flash drive with free area available.
2102 USB flash drive Access Error
The mounted USB flash drive is out of
support, or USB flash drive is broken.
Check the spec and type of the USB flash drive. See "
7-1. Solving Printer Problems".
2105
No Files
No available data in the USB flash
drive.
Check the free space of the USB flash drive with PC.