Filter
Top Products
GT-3 Series
4. Printing Directly from Applications
68
(3) Replace the Bush Platen Shaft with Platen Height Adjustment Lever assembled and the Platen Positioning Plate to the
"Platen Lowering Set" (option).
<Note>
Fix the Platen Positioning Plate by pushing it to the machined surface while the positioning jig is inserted into the Platen
Arm.
(4) Install the Platen as it is and fix it. The Platen Height Adjustment Lever is in the lower hole.
Positioning jig
Machined surface
Platen hei
g
ht ad
j
ustment leve
r
Bush
p
laten shaf
t
Platen
p
ositionin
g
p
lat
e
Original position
After replacing to Platen Lowering Set,
the Platen height is lowered by 13 mm.