Brother GT-341 Printer User Manual


 
Thank you very much for buying a BROTHER printer. Before using your new printer, please read the safety instructions below
and the explanations given in the instruction manual.
SAFETY INSTRUCTIONS
[1] Safety indications and their meanings
This instruction manual and the indications and symbols that are used on the printer itself are provided in order to ensure safe
operation of this printer and to prevent accidents and injury to yourself or other people. The meanings of these indications and
symbols are given below.
Indications
DANGER
The instructions which follow this term indicate situations where failure to follow the
instructions will result in death or serious injury.
WARNING
The instructions which follow this term indicate situations where failure to follow the
instructions could result in death or serious injury.
CAUTION
The instructions which follow this term indicate situations where failure to follow the
instructions may result in minor or moderate injury.
Symbols
· · · · ·
This symbol ( ) indicates something that you should be careful of. The picture inside the triangle
indicates the nature of the caution that must be taken.
(For example, the symbol at left means “beware of injury”.)
· · · · ·
This symbol ( ) indicates something that you must not do.
· · · · ·
This symbol ( ) indicates something that you must do. The picture inside the circle indicates the
nature of the thing that must be done.
(For example, the symbol at left means “you must make the ground connection”.)
[2] Notes on safety
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the right side cover. Do not touch the high-voltage area in the control box as high voltage can result
in severe injury.
WARNING
Basic precautions
To prevent accidents and problems, do not modify
the machine yourself.
Brother will not be held responsible for any accidents
or problems resulting from modifications made to the
machine.
Do not handle the power cord with wet hands,
otherwise it may cause electric shocks.
GT-3 Series
i