Brother HL-1020 Printer User Manual


 
REGULATIONS
Federal Communications Commission(FCC)
Declaration of Conformity (For USA Only)
Responsible Party : Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911, USA
TEL : (908) 704-1700
declares, that the products
Product Name :Brother Laser Printer HL-820, HL-1020,
HL-1040, HL-1040DX, HL-1050, HL-1050DX
Model Numbers :HL-8L, HL-8h
Product Options :ALL
complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Important
A shielded interface cable should be used in order to ensure
compliance with the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother
Industries, Ltd. could void the user’s authority to operate the
equipment.
Industry Canada Compliance Statement (For
Canada Only)
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes
les exigences du Règlement sur la matériel brouilleur du
Canada.
International Energy Star Compliance
Statement
The purpose of the International Energy Star Program is
to promote the development and popularization of
energy-efficient office equipments, which includes
computers, monitors, printers, facsimile receivers and
copy machines world-wide.
As an International Energy Star partner, Brother
Industries, Ltd. has decided that this product meets the
guideline of the program.
FDA Regulations (For 110-120 V Model Only)
U.S. Food and Drug Administration (FDA) has implemented
regulations for laser products manufactured on and after August 2,
1976. Compliance is mandatory for products marketed in the United
States. One of the following labels on the back of the printer
indicates compliance with the FDA regulations and must be attached
to laser products marketed in the United States.
MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen,
CHINA
This product complies with FDA radiation performance standards, 21
CFR Subchapter J
MANUFACTURED:
BROTHER INDUSTRIES (USA) INC.
2950 Brother Blvd., Bartlett, TN 38133, U.S.A.
This product complies with FDA radiation performance standards, 21
CFR Subchapter J
MANUFACTURED:
BROTHER INDUSTRIES LTD.
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467 Japan
This product complies with FDA radiation performance standards, 21
CFR Subchapter J
Laser Safety (For 110
120 V Model Only)
This printer is certified as a Class I laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for
Health and Safety Act of 1968. This means that the printer does
not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined
within protective housings and external covers, the laser beam
cannot escape from the machine during any phase of user
operation.
Radio Interference (220-240 V Model Only)
This printer complies with EN55022(CISPR Publication
22)/Class B.
Before this product is used, ensure that you use a double-
shielded interface cable with twisted-pair conductors and that it
is marked
IEEE 1284 compliant
. The cable must not exceed
1.8 metres in length.
Caution
Use of controls, adjustments or performance of procedures other
than those specified in this manual may result in hazardous
radiation exposure.