Brother J6710DW All in One Printer User Manual


 
Troubleshooting
87
B
i Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover (1) into the open position.
Make sure that there is no jammed
paper left in the corners of the machine.
IMPORTANT
If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
If the print head is at the right corner as
shown in the illustration, you cannot move
the print head. Re-connect the power
cord. Hold down Stop/Exit until the print
head moves to the middle. Then unplug
the machine from the power source, and
take out the paper.
If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
j Gently close the scanner cover using
the finger holds on each side.
CAUTION
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on
each side of the scanner cover when
opening and closing it.
Note
Make sure you pull out the paper support
until it clicks.
k Re-connect the power cord.
Note
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. (See Additional paper jam clear
operations on page 88.)
1