Filter
Top Products
Loading paper
25
2
Tray use in Fax mode
(MFC-J6710DW only) 2
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
Tray #2 is set to a different paper size that
is more suitable for the received faxes.
Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a Press Tray Setting.
b Press a or b to choose Tray Use:Fax.
c Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
d Press a or b to choose Complete.
Press OK.
Secure Paper Feed mode for
Ledger size Short Grain Paper2
If your printed pages have smudge problems
when using Ledger paper, your paper may be
short grain paper. Choose
LGR - Short Grain and set it to On to
avoid this problem.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
LGR - Short Grain.
d Press d or c to choose On.
Press OK.
e Press Stop/Exit.
Note
• If you are not sure about the type of paper
you are using, consult the paper
packaging or paper manufacturer for
paper specifications.
• Printing will be slower when using the
LGR - Short Grain setting.