Filter
Top Products
ENGLISH
- 15 -
How to define the cutting position
(creating borders)
The Auto Cross Cutting System automatically detects the size of your document and trims each edge of
your square or rectangular document. The cutting position can be adjusted to create a margin on each
edge of the laminated document
.
Auto Cutter Mode – Border
This mode is ideal for protecting documents from water or dust.
To create a margin on each edge of your square or rectangular document…
(1)Change the position of the Power dial to Border.
(2)Place the document in the document tray and press Start. The document will be cut with about a 0.18”
(4.5 mm) margin of laminate on each edge of the paper.
Cutting Position
To p
Top of paper 0.18^± 0.06^ ( 4.5mm ±1.5mm)
Bottom
Bottom of paper 0.18^± 0.06^ ( 4.5mm ±1.5mm)
Right
Right edge of paper 0.18^± 0.06^ ( 4.5mm ±1.5mm)
Left
Left edge of paper 0.18^± 0.06^ ( 4.5mm ±1.5mm)
Auto Cutter Mode – No Border
This mode is ideal for making stickers.
To generate a document without a margin of laminate on each edge…
(1)Change the position of the Power Dial to No Border.
(2)Place the document in the document tray and press Start. The document will be trimmed with a very
small margin of laminate (approximately 0.04^ - 0.06^ (1 - 1.5mm) from each edge of the document).
Cutting Position
To p
Top of paper 0.06^ ± 0.06^ (1.5mm ± 1.5 mm)
Bottom
Bottom of paper 0.06^ ± 0.06^ (1.5mm ± 1.5 mm)
Right
Right edge of paper 0.04^ ± 0.06^ (1.0mm ± 1.5 mm)
Left
Left edge of paper 0.04^ ± 0.06^ (1.0mm ± 1.5 mm)
Auto Cutter Mode – Cutter Off (for sensitive documents)
Use this mode to prevent any part of the document from being cut away during the finishing process. Cutter
Mode will sense the beginning and the end of your document and automatically leave a wide margin of extra
laminate, which you may manually trim.
Document
0.18” (4.5mm)
0.18” (4.5mm)
(1)When Cutter Off Mode is selected, the machine will laminate the document without trimming the
edges. The document is processed and ejected from the machine.
(2)Press Cut to manually cut the laminate and remove the document from the machine.
Document