Brother LX-1200 Laminator User Manual


 
ENGLISH
- 25 -
Installing/replacing the film roll in the
cartridge
Cartridges can be recycled by replacing the film roll. Be sure to use Brother-authorized LC film refills only.
Refill cartridges using the following instructions:
(1) Remove the film cartridge from the machine
being careful not to grab the cartridge by the
shutter.
(2) Open the film cartridge by sliding the shutter in
the direction of the arrows until it locks into
place. Open the film cartridge by gently
separating the clear top cover from the gray
bottom cover.
(3) Remove the old film roll from the cartridge.
Note
If the film is stuck, turn on the machine and
press the Cut button to remove the excess
film.