Filter
Top Products
- 16 -
ENGLISH
Auto Cutter Mode - Extra Border
This mode is ideal for making documents for filing purposes.
The Extra Border will always be generated on the last part of the document to be fed through the
machine. You can choose 0.8” (20 mm) or 1.2” (30 mm) extra margin.
Change the width of the Extra Border by pressing the Extra Border button. The first time it is
pressed, the extra border will be set to 0.8” (20 mm), the next time 1.2” (30 mm) and the next time the
extra border mode will be turned off (as well as the Extra Border LED).
Off ® 0.8” (20 mm) ® 1.2” (30 mm) ® Off
To create an extra 0.8” (20 mm) margin on your document...
(1) Place the document in the document tray and press the Extra Border button once. The Extra Border
green LED will light.
(2) Press Start. The document will be laminated with a 0.8” (20 mm) Extra Border.
To create an extra 1.2” (30 mm) margin on your document...
(1) Place the document in the document tray and press Extra Border button twice. The Extra Border green
LED will blink.
(2) Press Start. The document will be laminated with a 1.2” (30 mm) Extra Border.
Document
Document
0.8” (20 mm) or
1.2” (30 mm)
Note
Selected Extra Border mode will remain on until the power is turned off or the Extra Border mode i
s
turned off. To turn the Extra Border mode off, press the Extra Border button until the Extra Border LED i
s
no longer lit.
To create an extra border for hole punching an 8.5” ´ 11” document, place the document in the tray
landscape with the side to have the extra border on the top (see illustration).
The Extra Border will appear
on this edge of the document