Filter
Top Products
Dialing and storing numbers
71
8
Dialing Access codes and
credit card numbers 8
Sometimes you may want to choose from
several long distance carriers when you
make a call. Rates may vary depending on
the time and destination. To take advantage
of low rates, you can store the access codes
of long-distance carriers and credit card
numbers as Speed Dial numbers. You can
store these long dialing sequences by
dividing them and setting them up as
separate Speed Dial numbers in any
combination. You can even include manual
dialing using the dial pad. (See Storing
Speed Dial numbers on page 66.)
For example, you might have stored ‘555 ’ on
Speed Dial: 03 and ‘7000 ’ on Speed Dial: 02.
You can use them both to dial ‘555-7000’ if
you press the following keys:
a Press (Speed Dial).
b Press a or b to choose Search.
Press OK.
c Enter 03.
d Press a or b to choose Speed Dial.
Press OK.
Note
If you stored 2 numbers in one Speed Dial
location, you will be asked which number
you want to send to.
e Press a or b to choose Search.
Press OK.
f Enter 02.
g Press Black Start or Color Start.
You will dial ‘555-7000 ’.
To temporarily change a number, you can
substitute part of the number with manual
dialing using the dial pad. For example, to
change the number to 555-7001 you could
press (Speed Dial), choose Search,
press 03 and then press 7001 using the dial
pad.
Note
If you must wait for another dial tone or
signal at any point in the dialing sequence,
create a pause in the number by pressing
Redial/Pause. Each key press adds a
3.5-second delay.