Setting Up the Machine
8
STEP 1
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one phone line with an external
telephone answering machine, connect it as
shown below.
Set the receive mode to ‘Manual’ if you have
an external answering machine. See the
section 12 Choosing a Receive Mode
on page 14. For more details, see
Connecting an external TAD (telephone
answering device) in Chapter 7 of the User’s
Guide.
5 Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1 Make sure that the power is turned on.
The LCD shows:
2 Open the ink cartridge cover (1).
3 Pull all the lock release levers down and
remove the yellow protective part (1).
1
2
No Cartridge
Black
Yellow
Cyan
Magenta
1
1