Brother MFC-8660DN Printer User Manual


 
General setup
19
3
Paper Size 3
You can use nine sizes of paper for printing
copies: A4, Letter, Legal, Executive, A5, A6,
B5, B6 and Folio, and four sizes for printing
faxes: A4, Letter, Legal or Folio (8"×13").
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document or an incoming
fax on the page.
a Choose one of the options below:
To set the paper size for the MP Tray
press Menu, 1, 3, 1.
To set the paper size for Tray#1
press Menu, 1, 3, 2.
To set the paper size for Tray#2
press Menu, 1, 3, 3 if you installed
the optional tray.
13.Paper Size
1.MP Tray
a Letter
b Legal
Select ab & OK
b Press a or b to select A4, Letter,
Legal, Executive, A5, A6, B5, B6,
Folio or Any.
Press OK.
c Press Stop/Exit.
Note
Any (size) appears only when you select
the MP tray (Menu, 1, 3, 1).
If you select Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.
A6 size is not available for the optional
Tray #2.
Tray use in Copy mode 3
You can change the priority tray that the
machine will use for printing copies.
When you select Tray#1 Only, MP Only or
Tray#2 Only
1
, the machine loads the
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert the paper in the empty tray.
To change the tray setting follow the
instructions below:
a Press Menu, 1, 7, 1.
17.Tray Use
1.Copy
a MP>T1
b T1>MP
Select ab & OK
b Press a or b to select Tray#1 Only,
Tray#2 Only
1
, MP Only, MP>T1>T2
1
or T1>T2
1
>MP. Press OK.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
c Press Stop/Exit.
Note
When loading the documents from the
ADF and MP>T1>T2 or T1>T2>MP is
selected, the machine looks for the tray
with the most suitable paper and pulls
paper from that tray. If no tray has suitable
paper, the machine pulls paper from the
higher priority tray.
When using the scanner glass, your
document is copied from the higher
priority tray even if more suitable paper is
in another paper tray.