Filter
Top Products
Dialing and storing numbers
61
8
Note
• If you have selected Fax/IFAX in d and
added One-Touch or Speed-Dial numbers
that are stored as ‘IFAX’, you cannot
select S.Fine.
• When you create a group or broadcast
using Scan to E-mail only B/W200x100
and B/W200dpi are available. The file
format can be TIFF or PDF.
i Select the file format (TIFF or PDF) that
will be used to send to your computer.
j Do one of the following:
To store another group for
broadcasting, go to b.
To finish storing groups for
broadcasting, press Stop/Exit.
Dialing access codes and
credit card numbers 8
You can combine more than one Quick-Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate long distance carrier.
For example, you might have stored ‘555’ on
Speed-Dial #003 and ‘7000’ on Speed-Dial
#002. You can use them both to dial
‘555-7000’ if you press the following keys:
Hold down Shift as you press
Search/Speed Dial, 003. Hold down Shift as
you press Search/Speed Dial, 002 and
Start.
Numbers can be added manually by entering
them on the dial pad:
Hold down Shift as you press
Search/Speed Dial, 003, 7001 (on the dial
pad), and Start.
This would dial ‘555–7001’. You can also add
a pause by pressing the Redial/Pause key.
Pause 8
Press Redial/Pause to insert 3.5-seconds
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.
Tone or Pulse
(For Canada only) 8
If you have a Pulse dialing service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a Press Hook.
b Press # on the machine’s control panel.
Any digits dialed after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialing service.