Filter
Top Products
Specifications
169
Authentication and encryption for wireless users only
Authentication method
The Brother machine supports the following methods:
Open system
Wireless devices are allowed to access the network without any authentication.
Shared key
A secret pre-determined key is shared by all devices that will access the wireless network. The
Brother machine uses the WEP keys as the pre-determined key.
WPA-PSK
Enables a Wi-FI Protected Access Pre-Shared key (WPA-PSK), which enables the Brother
wireless machine to associate with access points using TKIP encryption (WPA-Personal).
LEAP
Cisco LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems,
Inc. and enables the Brother wireless product to associate with access points using CKIP and
CMIC encryptions.
Encryption methods
Encryption is used to secure the data that is sent over the wireless network. The Brother machine
supports the following encryption methods:
WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure
key.
TKIP
TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing a message integrity
check and re-keying mechanism.
AES
AES (Advanced Encryption Standard) is Wi-Fi
®
authorized strong encryption standard.
CKIP
The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.