Filter
Top Products
ControlCenter4
90
3
OCR tab 3
Lets you configure settings for Scan to OCR by pressing the SCAN key on your Brother machine.
Choose the settings for File Type, Target Application, OCR Language, Resolution, Scan Type,
Document Size, Brightness and Contrast as needed. Click OK.
E-mail tab
3
Lets you configure settings for Scan to E-mail by pressing the SCAN key on your Brother machine.
Choose the settings for File Type, File size, Resolution, Scan Type, Document Size, Brightness,
Contrast and Auto Crop as needed. Click OK.
Note
You can change the data compression ratio of the scanned image with File size.
File tab 3
Lets you configure settings for Scan to File by pressing the SCAN key on your Brother machine.
Choose the settings for File Type, File Name, Destination Folder, Show Folder, File size, Resolution,
Scan Type, Document Size, Brightness, Contrast and Auto Crop as needed. Click OK.
Note
• If Show Folder is checked, the destination of the scanned image to save will be shown after scanning.
• You can change the data compression ratio of the scanned image with File size.
Launching the BRAdmin utility 3
If you have installed BRAdmin Light or BRAdmin Professional 3, the (BRAdmin) button lets you open
the BRAdmin Light or BRAdmin Professional 3 utility.
The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It also can
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as IP address. Refer to the guide noted below for information about installing BRAdmin Light from the
supplied CD-ROM.
uuNetwork User’s Guide
If you require more advanced machine management, use the latest version of BRAdmin Professional 3 that
is available as a download from http://solutions.brother.com/
.
a Select the Device Settings tab.
b Click (BRAdmin). The BRAdmin Light or BRAdmin Professional 3 utility dialog appears.
Note
If you have installed both BRAdmin Light and BRAdmin Professional, ControlCenter4 will launch BRAdmin
Professional 3.