Filter
Top Products
Chapter 2
24
Paper Size and Type
(MFC-J6710DW) 2
To get the best print quality, set the machine
for the type of paper you are using.
You can use eight sizes of paper for printing
copies: Letter, Legal, Ledger, A4, A5, A3,
Executive and 4 6in. (10 15 cm) and five
sizes for printing faxes: Ledger, Letter, Legal,
A3 or A4. When you load a different size of
paper in the machine, you will need to change
the paper size setting at the same time so
your machine can fit an incoming fax on the
page.
a Press Tray Setting.
b Press a or b to choose Tray#1 or
Tray#2.
Press OK.
c Do one of the following:
If you chose Tray#1, press a or b to
choose Paper Type and press
d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy
or Transparency.
Press OK.
Press a or b to choose Paper Size
and press d or c to choose Letter,
Legal, Ledger, A4, A5, A3,
Executive or 4"x6".
Press OK.
If you chose Tray#2, press a or b to
choose Paper Size and press
d or c to choose Letter, Legal,
Ledger, A4, A3 or Executive.
Press OK.
d Press a or b to choose Complete.
Press OK.
e Press a or b to choose Complete.
Press OK.
Note
• You can only use plain paper and paper
sizes Ledger, Letter, Legal,
Executive, A3 or A4 in Tray#2.
• The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Tray use in Copy mode
(MFC-J6710DW only) 2
You can change the default tray the machine
will use for copies.
Auto Select will allow your machine to
feed paper from either Tray #1 or Tray #2,
using the paper type and size settings from
the COPY key menu.
To change the default setting follow the
instructions below:
a Press Tray Setting.
b Press a or b to choose
Tray Use:Copy.
c Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
d Press a or b to choose Complete.
Press OK.
Note
You can change the paper size and tray
selection temporarily for the next copy.
(See Paper Size on page 57 and Tray
Select (MFC-J6710DW only) on page 58.)