Brother MFC-J6710DW All in One Printer User Manual


 
Chapter 4
34
c You can change the following fax
sending settings. Press FAX and then
press a or b to scroll through the fax
settings. When the setting you want is
highlighted, then press d or c to choose
your option, and press OK.
(Basic User's Guide)
For details changing the following fax
sending settings, see pages 35 to 36.
Glass ScanSize
Color Fax Transmission
Preview Outgoing Fax
Transmission Verification Report
(Setup)
(Advanced User's Guide)
For more advanced fax sending
operations and settings, see Chapter 3
Sending a fax in the Advanced User’s
Guide:
Contrast
Fax Resolution
Set New Defaults
Factory Reset
Faxing at End of Call
Broadcasting
Real Time TX
Overseas Mode
Delayed Fax
Batch TX
Canceling Waiting Jobs
Polled Transmit
d Enter the fax number.
Using the dial pad
Using the Phone Book
Phone Book
Using call history
Outgoing Call
Caller ID hist.
Note
You can preview a fax message before
sending it by setting Fax Preview to ON.
(See How to preview an outgoing fax
on page 35.)
e Press Black Start or Color Start.
Faxing from the ADF
The machine starts scanning the
document.
Faxing from the scanner glass
When you press Black Start, the
machine starts scanning the first
page.
Do one of the following:
To send a single page, press 2 to
choose No (or press Black Start
again).
The machine starts sending the
document.
To send more than one page,
press 1 to choose Yes and place
the next page on the scanner
glass. Press OK. The machine
starts scanning the page. (Repeat
this step for each additional
page.)
If you press Color Start, the
machine starts sending the
document.
Stop faxing 4
To stop faxing, press Stop/Exit.