Brother PT-18RKT Label Maker User Manual


 
TROUBLESHOOTING
60
Error Messages
The length of the label to be printed using the text entered is
longer than the length setting. Edit the text to fit within the set
length or change the length setting.
There are no files stored in the internal memory when you try
to open or delete a file. Save a label file first.
There is not enough internal memory available when you try
to save a label file. Delete any unnecessary files to make
more memory available for the new label file.
The result of the currency conversion exceeds 10 digits.
Enter a smaller value for conversion.
There is no exchange rate entered for the currency
conversion. Enter an exchange rate.
The bar code data entered is less than the minimum four
digits. Enter a minimum of four digits for the bar code data.
The number of digits entered in the bar code data does not
match the number of digits set in the bar code parameters.
Enter the correct number of digits.
The bar code data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of
the bar code data for the CODABAR protocol). Enter the bar
code data correctly.
There is already a bar code entered in the text data when you
try to enter a new bar code. You can only use one bar code
in each label.
Message Cause/Remedy