Filter
Top Products
58
This function can be used to print many copies of the same text while increasing a certain
number in the text by 1 after each label is printed.
To use the Numbering function:
1 Press f, w, h or e to position the cursor below the number that you wish to
increase.
2 Hold down c and press O. The message “NUMBER UNTIL” appears in the display
with the current setting.
3 Press a number key between 1 and 9 (or press h or e) to select the last num-
ber that is to be printed.
☞ To cancel the Numbering, hold down c and press O (or press just * ).
4 Press p (or r) to begin printing the labels. The number of each copy is displayed
while it is being printed.
☞ If the Auto cut function is set to ON, each label is automatically cut off after it is
printed.
EXAMPLE
To print three labels with numbers 1, 2 and 3:
1
Position the cursor below “1”.
2 Hold down c and press O.
NUMBERING FUNCTION
1:
STUDIO _
Caps
Alt
1
Caps
Alt
UNTIL
1
NUMBER