Filter
Top Products
13
9.3 Time Settings
Input the correct time manually or input the
NTP server on your network. Using NTP
Server: Check ON box in NTP. Specify the
NTP server name, check interval, and time
zone. (see previous page)
9.4 Management
Management Settings includes the following
parameters:
Host Setup
Time Settings
Syslog Setup
Unit Information
Transfer Packet Information
Wireless LAN PC Information
Log Information
Ping Test
Firmwave Update
Return to Default Setting
9.4.1 Host Setup
The user ID is "root". The default password is
blank -- no password.
To input a new password:
• Enter the password in the "New Password"
field
• Re-enter the password in the "Confirm
Password" field
If you are changing an old password, you must
enter the old password in the "Current
Password" field also.
Configuration of the WLM2-G54 via a web
browser (including Client Manager) or a
Telnet session may be enabled or disabled
here. A wired session via the serial port and
terminal software may be used to configure
the WLM2-G54 if WEB and Telnet are
disabled.
9.4.2 Syslog Setup
Figure 9.4.1 Host Setup
Figure 9.4.2 Syslog Setup