Buffalo Technology WLI-TX4-G54HP Power Supply User Manual


  Open as PDF
of 30
 
20
Automatic Assignment (DHCP Server) - This setting
allowstheEthernetConvertertoobtainitsIPaddress
automaticallyfromaDHCPserveronthenetwork.
Manual Assignment - This assigns the Ethernet
Converteraspecic("Static")IPaddress.IfaStaticIP
addressisselected,youmustenteraSubnetMaskas
well.
NOTES: ToconguretheEthernetConverterinthefuture,ausermustbothknowitsIP
address,and,beonthesamesubnet.BecarefulwhenchangingtheEthernetConverter’s
IPaddress!
IfchangestotheEthernetConverter’sIPaddressmakeitdifcultforyoutoaccessthe
web-basedcongurationutility,rememberthatyoucanusetheEthernetConverter
ManagementsoftwaretorecongureorresetDHCP(seepages8-9)oraStaticIP
address.IftheEthernetConverter'sIPaddresshasrevertedtothedefault1.1.1.1,you
maymanuallycongureyourcomputertoanIPaddressonthesamesubnet,suchas
1.1.1.2,allowingittoconnecttotheEthernetConverter(seepages11-12).Don'tforget
tochangeyourcomputer'sIPaddressbackwhenyou'venishedconguringtheEthernet
Converter.
TheIPAddressdoesnotneedtobeintherangeoftheDHCPserver'sscopeto
successfullypassDHCPrequeststonetworkclientsbehindtheEthernetConverter.
Network Settings
 previous next