Filter
Top Products
Configuration Views Device Configuration View
Spectrum Enterprise Manager Page48 SmartSwitch 6000
This view (Figure 15) provides status and
configuration information about the device as a
whole as well as on a port-by-port basis. Fields
and Column heading with the Device
Configuration view and its subviews are explained
in further detail in the SPECTRUM Views
documentation.
Contact Status
Indicates whether a connection has been
established with the module.
Accesses the Community Name view. For
information on using the Community Name view,
refer to SPECTRUM Portable Management
Application Tools Guide.
Accesses the TFTP DownLoad dialog box, which
lets you upgrade firmware for the module from
the TFTP Boot or Bootp Server. For more
information, refer to SPECTRUM Portable
Management Application Tools Guide.
Opens a dialog box that lets you set up your
workstation to be notified of traps received and
sent by a module.
Interface Configuration Table
This section of the Device Configuration views
provides the following information:
Number of Interfaces
The number of interfaces available from the
module.
Index
The numerical value identifying the port.
Type
The type of hardware interface for the port.
Phy Address
The MAC address of the port.
Max Frame Size
The maximum frame size for the module.
Oper Status
The current operational state of the port (Up,
Down, or Testing).
Component
Table
Download Application
Trap
Table