Filter
Top Products
9032208 E4 ConÞguration Views
3-3
Interface ConÞguration View
Last Change
Displays the value of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last re-
initialization of the local network management subsystem, then this object
contains a zero value.
Queue Length
Displays the length of the outbound packet queue in packets.
Packet Size
Displays the largest Maximum Transmission Unit (MTU) that can be
transmitted or received by the port, measured in octets.
Interface ConÞguration View
This view provides device conÞguration information.
To access this view, do the following:
1. Within the Interface Device view, highlight the Interface icon.
2. From the Icon Subviews menu, select IF ConÞguration.
This view provides the following information:
Operation Status
Displays the current operating status of the interface or port. Possible values
are On, Off, and Testing.
Admin. Status
Displays the current administrative state of the interface or port. Possible
values are On, Off, and Testing.
Last Change
Displays the value of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last re-
initialization of the local network management subsystem, then this object
contains a zero value.
Network Name/Address
Displays the network name/address for this interface or port.
Physical Address
Displays the physical (MAC) address of the interface or port.
Bandwidth
Displays the estimated bandwidth of the interface measured in bits per
second. For interfaces that do not vary in bandwidth or for which no accurate
estimate can be made, a nominal bandwidth is provided.