Filter
Top Products
1-4
Introduction
Ring to be used with the 7H02-06 Module. These modules provide
the capability to share data without the use of external bridges or
routers.
The 7C03 MMAC SmartSwitch is a unique module that can be
installed in an MMAC Series chassis. The 7C04 Workgroup
SmartSwitch and the 7C04-R Workgroup SmartSwitch are stand-
alone chassis that provide the same functions.
1.3 FEATURES
The 7H02-06 provides Fast Ethernet connectivity via 5 front panel
RJ45 connectors and one FEPIM, and also includes the following
features:
• LANVIEW LEDs
• FEPIMs
• Fixed connectivity ports
1.3.1 LANVIEW LEDs
The 7H02-06 Module incorporates LANVIEW - Cabletron Systems
status monitoring and diagnostic system. Should a problem arise,
such as a power failure, the LANVIEW LEDs help you diagnose the
problem.
The 7H02-06 Module incorporates the following LANVIEW LEDs:
• Transmit (TX) LED
• Receive (RX) LED
For more information about the LANVIEW LEDs and the reset
switch on the 7H02-06 Module, refer to Chapter 4, Troubleshooting.