Filter
Top Products
Installation
3-3
Figure 3-2. Installing an FEPIM
3.3 INSTALLING/REMOVING THE 7H02-06 MODULE
The 7H02-06 Module is installed in: the 7C03 MMAC SmartSwitch,
the 7C04 Workgroup SmartSwitch or the 7C04-R Workgroup
SmartSwitch by using the following steps and referring to the
appropriate figure.
3.3.1 Installing the 7H02-06 Module in a 7C03 MMAC
SmartSwitch
The
7H02-06
Module cannot be installed in the left most slot of the
7C03 MMAC SmartSwitch. That slot is reserved for the 7X00
SmartSwitch Controller Module.
Note:
Before installing the 7H02-06 Module, attach the wrist strap
included with the module (instructions are printed on the packet).
To install the
7H02-06
Module in a 7C03 MMAC SmartSwitch,
follow the listed steps and refer to Figure 3-3.