Filter
Top Products
Rackmount Installation
SEHI100TX User’s Guide 4-5
Rack Mounting the SEHI
Refer to Figure 4-4 and proceed as follows to install the SEHI into a
19-inch rack.
1. Remove the four cover screws (two from each side) located along the
front edges of each side of the SEHI.
2. Using the four 6-32 x 3/8-inch replacement flathead cover screws
provided in the rack mounting kit, attach the rack mounting brackets
to each side of the SEHI.
Figure 4-4 Installing the Rack Mounting Brackets
Do not remove the cover from the SEHI100TX-22. Do not
remove any other screws from the unit.
Screws (4)
Rack Mounting
Brackets (2)
1511_05
PWR
CPU
CLN
HubSTACK
100BASE-TX HUB
WITH
LANVIEW®
SEHI
100TX-
22
22X 21X 20X 19X 18X 17X
11X 10X 9X 8X 7X 6X
16X 15X 14X 13X 12X
5X 4X 3X 2X 1X
E
1
A
RCV
LNK
RCV
LNK
22 21 20 19 18 17 16 15 14 13 12
11 10 9 8 7 6 5 4 3 2 1
EPIM 1
SEHI Book Page 5 Wednesday, May 15, 1996 10:42 AM