Filter
Top Products
2-3
Installing the 9A000
2.2 The Reset Switch
The Reset switch is located on the rightmost front panel, under the top plastic
tab as shown in Figure 2.2. It serves two functions:
• Pressing the reset switch twice within three seconds causes the pro-
cessor (i960) to reset.
• Pressing and holding the switch on for three or more seconds causes
the module to shutdown. Pressing and holding again for three sec-
onds restarts the module.
SNMP management may be used to disable this switch to enhance module
security.
Figure 2.2 - The Reset Switch
Reset Switch