Filter
Top Products
3-14
Switch Hardware
If a model A power supply goes into shutdown, it will remain shut down
until the power switch is turned off and turned on again (power cycle). The
power switch must remain off long enough for the SHUTDOWN LED to
extinguish (this allows the capacitors to discharge).
WARNING! A replacement AC power supply should
never be placed in an SFCS-1000 that already
contains a DC power supply, and vice-versa. If
these instructions are not heeded, there is a
risk of electrical shock, danger to personal
health, and serious damage to the equipment.
If the power supply needs to be replaced, please refer to Chapter 3, Hardware
Maintenance Procedures, for hot-swap information.