Filter
Top Products
The System Level Screen
Page 5-8
5.3 The System Level Screen
Access the System Level screen (Figure 5-4) from the Device Setup menu.
Figure 5-4. System Level Screen
5.3.1 System Date and System Time
Use these fields to set the correct date and time.
Type the date into the field in a MM/DD/YY format for the date, and
HH:MM:SS for the time. If the format entered is invalid, the message
“Invalid Date” or “Invalid Time” appears and the edit is rejected.
5.3.2 IP Address
Use this field to set the host Internet Protocol (IP) address for the STHI.
If the IP Address is changed, the STHI will execute a soft-reset after SAVE
is invoked to re-initialize all affected parameters.
Only a user with Super-User access can change the device’s
IP address. See Section 5.4 for information about
Super-User access.
STHI LOCAL MANAGEMENT Flash Image Version: 1.00.00
SYSTEM LEVEL
System Date: 06/15/10 System Time: 13:08:00
IP Address Subnet Mask
SNMP Agent 134.141.143.141 255.255.0.0
Enable IP Address Discovery: [YES] State: [SEEKING ]
Retry Interval (0001-9999 Mins): 0015
Enable Beacon Recovery: [YES]
Number of Retries (000-100, 999=infinite): 004
Retry Interval (000-999 Secs): 021
FNB MAC Address - Physical: 00-00-B8-00-00-00
FNB MAC Address - Locally Administered: 00-00-B8-E8-A5-B1
SAVE RETURN
TIP