Filter
Top Products
Chapter 4: Management
4-4 HSIM-W85 User’s Guide
Only the previous commands, which are particular to the HSIM-W85,
will be described in the following sections. The host platform’s manual
describes the other commands that are not particular to the HSIM-W85.
Refer to the host platform manual for information on the other
commands.
4.2.1 Commands
The Network Tools function resides on the host platform and allows the
user to access and manage network devices. Figure 4-2 shows the
Network Tools Help screen. Screens may be slightly different depending
on the host platform and the version of firmware.
To access the Network Tools screen, access Local Management, then use
the arrow keys to navigate to and highlight the NETWORK TOOLS
menu item in the appropriate menu screen and press ENTER. The
Network Tools Help screen displays. Refer to the host platform manual
for details on accessing and navigating Local Management.
TIP
Type help at the prompt to list all the commands that are
available for the device in the current operational mode. If help
is needed with a specific command, type help and the
<command>. Use lower case characters when entering
commands in Network Tools. Uppercase characters may be
specified for some of the options. A command used incorrectly
(wrong syntax or case) will prompt a display of the correct
usage.