Filter
Top Products
Network Tools
HSIM-W85 User’s Guide 4-11
Example:
dsx1
Syntax: dsx1
dsx1 near
dsx1 near <1..96>
dsx1 linetype <ESF|D4> <line>
dsx1 loopback <no|payload|line> <line>
dsx1 txclksrc <loop|local> <line>
dsx1 <line>
dsx1 <line>
<ES|SES|SEFS|UAS|CSS|PCV|LES|BES|DM|LCV>
Description: This command allows the user to read the contents of
several tables defined in RFC 1406.
“line”, as an option, refers to the number of an instance of
a physical T1 interface. A different “line” is in the choice
between no,
payload, and line for the loopback function.
The acronyms in caps refer to error types defined in the
RFC. Refer to RFC 1406 for more information.
<1..96> is the number of a previous 15 minute
measurement interval in the table. Interval “1” is always
the latest interval to have taken place, with interval “2” as
the next latest, etc.
Near indicates the device on your side of the WAN line.
-> ds1alarm
2689_2
#-----------------------------------------------------------------------------------------------------------------------------------
# DS1 Alarm Thresholds
#-----------------------------------------------------------------------------------------------------------------------------------
# HSIM DS1 DS1 Admin Trap ES ES BPV Error BPV Error
# ID Index ID Status Admin Count Interval Rate Interval
# (minutes) (minutes)
#-----------------------------------------------------------------------------------------------------------------------------------
# 1 1 29 Disabled Enabled 100 6 6 15
# 1 2 30 Disabled Enabled 100 6 6 15
# 1 3 31 Disabled Enabled 100 6 6 15
# 1 4 32 Disabled Enabled 100 6 6 15
# 1 5 33 Disabled Enabled 100 6 6 15
# 1 6 34 Disabled Enabled 100 6 6 15
# 1 7 35 Disabled Enabled 100 6 6 15