Filter
Top Products
Network Tools
HSIM-W85 User’s Guide 4-5
Figure 4-2 Network Tools Help Screen
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command at the
Network Tools prompt, adding any required parameters, and pressing
ENTER to execute the command.
There are two categories of commands in the command set:
• Built-in Commands – Allow the user to access and manage network
devices. The commands for the HSIM-W85 are imux, ds1alarm,
wanpq, dsx1, and ds1ext. The other commands listed in Figure 4-2
are described in the host platform manual.
• Special Commands – Allow the user to exit from Network Tools. The
commands are done, exit, and quit. All three commands perform the
same function.
-> help
090829
arp
netstat
show traceroute
defroute
ping
reset
bridge
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
Commands Available to the User:
Built in Commands:
Welcome to Network Tools
soft_reset
telnet
link_trap
imux
ds1alarm wanpq
dsx1 ds1ext
stpStandby