Filter
Top Products
Collating Copies
2-21
Basic Copying Features
2
● If you want to set the Rotate mode:
❑
Make sure you have set SORT ROTATE in Copy Settings (from the Additional
Functions menu) to
‘01 ON
’ before making copies.
(See “Sort Rotate,” on p. 4-9.)
❑ Proceed to step 3.
IMPORTANT
• The Rotate Collate mode can be used when:
- Available paper size is set both horizontally and vertically in the paper drawers
and stack bypass
- DRAWER ELIGIBLTY in Common Settings (from the Additional Functions menu)
is set to ‘02 ON’ for the paper drawer and stack bypass designated for the Rotate
Collate mode. (See Chapter 4, “Selecting and Storing Settings,” in the Reference
Guide.)
• If the Finisher-L1 (optional) is attached, the Rotate Collate mode cannot be set.
● If you want to set the Offset mode:
❑ Set SORT ROTATE in Copy Settings (from the Additional Functions menu) to
‘01 ON
’ before making copies. (See “Sort Rotate,” on p. 4-9.)
❑ Proceed to step 3.
IMPORTANT
• If the optional finisher is attached, the Offset Collate mode is set automatically.
• The Offset Collate mode can be set only if the optional finisher is attached.
3
Enter the desired copy quantity (1 to 99) using the numeric
keys.
For details about entering the copy quantity, see “Specifying the Required
Number of Copies,” on p. 2-2.
4
Press [Start].
If the original is placed on the platen glass, follow the instructions that appear on
the display ➞ press (Start) once for each original. When scanning is
complete, press (OK).
Copying starts.
123
456
789
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER
SYMBOLS
Start