Filter
Top Products
Frame Erase
3-15
Special Copying Features
3
5
Press [F4] (ORIGNAL SIZE) to select the size of the original ➞
press [OK].
Each time you press (ORIGNAL SIZE), the next or previous menu option
becomes highlighted.
The Frame Erase Width setting menu appears.
NOTE
• You can set the Hole Punch Erase mode only for the original sizes shown on the
LCD display.
•
The machine automatically selects the copy paper size according to the original
size you set. <AUTO PAPER> is displayed; however, you can also select the paper
size manually.
6
Press [F3] (–) or [F4] (+) to set the desired hole punch erase
width (3 mm to 20 mm) ➞ press [OK].
You can also use the numeric keys to enter the hole punch erase width, and
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the Copy Basic Features screen appears.
NOTE
The default setting is ‘18 mm’.
F4
OK
F4
F3
F4
OK
C