Filter
Top Products
18
7. Establishing the Connection between the Device and ShareScan Administration
Console
In order to use the device, you must first install ShareScan Administration Console on a computer that is connected to the same
network as the device.
This section describes the procedure for installing ShareScan Administration Console on the computer and establishing a
connection with the device.
❏ System Requirements
The minimum requirements for installing ShareScan
Administration Console on your computer are as follows.
CPU
Dual core or higher
RAM
2GB or higher
Operating System
For details on supported operating systems, refer to the
release notes stored as a PDF file on the eCopy
ShareScan 5.0 Setup CD-ROM.
Hard disk
Type and format
IDE or SCSI drive (NTFS format is required)
Capacity
40GB or higher
Network
100 Base-TX network interface card is required.
Required components
TCP/IP and Client for Microsoft Networks
IMPORTANT
Depending on how the device is used, a system with higher
specifications may be required. For details, refer to the eCopy
ShareScan 5.0 Installation Guide (electronic manual).
❏ Installing ShareScan Administration
Console
Install ShareScan Administration Console (and other
necessary software) on the computer.
IMPORTANT
We recommend installing ShareScan Administration Console
on a computer that has a static IP address assigned.
1. Start the ShareScan Administration Console installer
provided by your dealer at the time of purchase.
The [Launch] window appears.
2. Select the language.