Filter
Top Products
7-12
Forwarding telephone messages
This feature allows you to automatically forward telephone messages, recorded when the fax is set to TAM
MODE, to a registered forwarding number.
You can use remote control to access the forwarding number and listen to your telephone messages.
Setting the forwarding number ________________
Note
• You must register a forwarding number and set TAM MODE before you can use this feature. Remote
control cannot be used to set this feature unless a forwarding number has been registered.
• If you set FWD SETTINGS to ON when a forwarding message has not been recorded, you will hear a
tone instead of a forwarding message when telephone messages are forwarded.
1
Press [Function].
D
Press [Start/Copy].
2
Use [
3
] or [
4
] to select TAM SETTINGS.
D
Press [Start/Copy].
3
Use [
3
] or [
4
] to select FWD SETTINGS.
D
Press [Start/Copy].
4
Use [
3
] or [
4
] to select ON.
D
Press [Start/Copy] twice.
5
Use the numeric buttons to enter the forwarding
number.
A maximum of 40 digits can be entered.
D
Press [Start/Copy].
6
Press [Stop].
Setting ends and the fax returns to standby mode.