Filter
Top Products
9-18
NO DATA The one-touch speed dialling
button or coded speed dialling
code you entered has not been
registered.
Register the one-touch speed
dialling button or coded speed
dialling code (see pp. 2-10,
2-12).
NO OGM The outgoing message has not
been recorded.
Record an outgoing message
(see p. 7-1).
REC’D IN MEMORY The fax received the document
in memory because paper or ink
ran out, a paper jam occurred,
or the incorrect BJ cartridge was
installed.
Load paper in the multi-purpose
tray (see p. 1-8), replace the BJ
cartridge (see p. 9-6) or clear
the paper jam (see p. 9-1).
TAM MEMORY FULL Either 50 messages have been
recorded or the total maximum
recording time of 10 minutes
has been reached.
Listen to your telephone
messages and delete any
unnecessary messages.
Alternatively, erase all telephone
messages stored in the fax
memory (see p. 7-7).
TX/RX CANCELLED You pressed [Stop] to cancel the
transmission.
If required, try sending again.
TX/RX NO. nnnn When the fax sends or receives
a document, it assigns it a
unique identification number
(nnnn).
Write the number down if you
will need it later.
WAIT COOLING During printing, the BJ cartridge
print head may have become
too hot.
Allow the fax to cool down. The
fax will resume printing when it
has cooled down.
Message Cause Action