Filter
Top Products
Changing the Font Style
You select a character pitch using the PITCH button. The
available pitches depend on the printer control mode you are
using, either BJ-10e mode or Epson LQ mode. (See Chapter 8,
Customizing the Printer, for details on the printer control
modes.) The default setting for both printer control modes is
10cpi.
To change the character pitch , follow these steps:
1. Press ON LINE to set the printer off-line.
2. Press the PITCH button to scroll through the available
settings.
Pressing the
PITCH button
Selects
BJ-10e mode Epson LQ mode
once 12 cpi 12 cpi
twice 17 cpi 15 cpi
three times Proportional spacing Proportional spacing
four times Return to the default
setting (10cpi)
Return to the default
setting (10cpi)
NOTE: If you cannot remember the pitch you have selected turn
off the printer, wait at least for seconds, and turn it back on. The
printer restores the default setting of 10 cpi, and you can start
over.
The font style determines the shape of a character. For example: