Filter
Top Products
Printing the Self Test
Lights_____________________________
Problem: The optional battery pack is low.
Solution: Recharge the battery pack. (The battery pack is described in Chapter 9, Installing
a
Options.)
Problem: The optional battery pack is fully discharged.
Solution: Recharge the battery pack. (The battery pack is described in Chapter 9, Installing
a
Options.)
Problem: The optional battery pack is fully discharged.
Solution: Recharge the battery pack. (The battery back is described in Chapter 9, Installing
a
Options.)
POWER ON LINE ERROR Printer Alarm
Blinks every
0.5 seconds
Off Off None
POWER
ON
LINE
ERROR Printer Alarm
Blinks
every 0.5
seconds
Off On Beeps five times; after five minutes, the printer beeps again and then tur
n
POWER ON LINE ERROR Printer Alarm
Blinks Off Blinks Beeps five times
If you have a problem with your printer that you cannot solve by
checking the indicator lights, try to print the self test as described in
Chapter 4, Using the Operator Panel. If you can print the self test, the
problem is not with the printer. Check the following:
1. Check the interface cable connection. Make sure you have
connected the correct interface cable to your computer and that
the connections are secure.
2. Make sure the computer is set up correctly for your printer.
3. Print a screen dump from your computer. If it does not print,
there is a problem with your software or the interface port. Call
the Canon Help desk at 1-800-423-2366.