Filter
Top Products
Canon MultiPASS C50 Getting Started ENGLISH
II-25
Message Error Code Cause Action
REC’D IN MEMORY – The paper or ink ran
out, or a paper jam
occurred, so the
MultiPASS C50
received the document
in memory.
Add paper to the sheet
feeder, change the BJ
cartridge, or clear the
paper jam, as needed. Print
the document from
memory by pressing the
(STOP) button.
RECEIVED IN FILE – The PC was off and a
document was received
in the MultiPASS C50
memory.
Print the file from the PC.
START AGAIN – An error occurred in
the phone line or in the
system.
Start the procedure again
from the beginning.
TX/RX CANCELLED – You pressed the
(STOP) button to
cancel the transmission.
–
TX/RX NO. nnnn – When the MultiPASS
C50 sends or receives a
fax, it assigns a unique
identification number
to it.
Write the number down if
you will need it later. You
can also print an activity
management report after
the transmission to check
the TX/RX number if
necessary.