Filter
Top Products
Loading Documents in the ADF
3-4
1
Make sure there is no document on the
platen glass.
2
Fan the edges that will feed into the
machine first then, tap the edge of
multipage documents on a flat surface to
even the stack.
3
Adjust the slide guides to the width of the
document.
4
Load the documents face down in the ADF.
• The document is now ready for scanning.
• For a multipage document, the pages are
fed one by one from the top of the stack
(from the last page).
• Wait until all pages of your document have
been scanned before starting a new job.
• 30 sheets of LTR-size (80 g/m
2
) documents
can be set in the ADF. If more than 30
sheets (LTR) of documents are set in the
ADF, paper jams may occur.
• 15 sheets of LGL-size (80 g/m
2
) documents
can be set in the ADF.
NOTE
DOCUMENT READY
1
2
3
STMT
A5
A4
LTR/
FLS/
LGL