Filter
Top Products
26
Connecting a Power Source and the Camera to
the Printer
Connect the camera to the printer using the cable (included with the camera)
and turn the printer’s power on.
For more detailed camera connection instructions, refer to your Camera User
Guide.
The numbered steps in the following instructions refer to the numbers in the above
illustration.
1
Place the printer on a flat area.
• Be sure to leave about 10 cm (4 in.) of clearance around the paper-handling slot
(at the rear) so that paper has sufficient room to jut out from the slot during
printing.
2
Connect the supplied AC cable to the supplied Compact
Power Adapter CA-CP100.
1
2
3
4
5
6
7
To DIGITAL Terminal
Canon camera compatible with CP-300/CP-200
Camera’s Compact Power Adapter
(sold separately or included with the
camera)
* Please use the camera’s compact
power adapter or a fully charged
battery pack (or charged batteries).
To Power Outlet
To Power Outlet
Compact Power Adapter
10 cm (4 in.)
or more of open space
To DC IN Terminal
USB cable included
with the camera