Filter
Top Products
Fax Only Mode
The fax is set up at the factory to Fax/Tel Mode. If you have a dedicated fax line, you need to set the
mode to Fax Only.
j Setting Fax Only Mode
When you set the fax to Fax Only Mode, the unit picks up every call and automatically treats it as a fax
transmission.
The fax cannot receive automatically if you are making copies, printing reports, or registering
information. See p. 72.
1
Press [Receive Mode] until ″Fax Only Mode″
appears on the LCD.
2
Press [Start/Copy].
When this mode is set, the LCD will display the
time and ″FaxOnly″.
j Receiving documents in Fax Only Mode
When the fax is set to Fax Only Mode, it automatically receives documents whenever a call comes over
the fax line.
1
Make sure the fax is set to ″Fax Only Mode″
(see above).
The fax assumes all incoming calls are from another fax machine sending a document. It receives the
documents automatically.
Receive Mode
Fax Only Mode
Start/Copy
12:00 FaxOnly
SETTING UP
18