Filter
Top Products
Memory Sending
You can use Memory Sending to send your document. With Memory Sending, the fax quickly scans the
document into memory. Then, after it dials the receiving party, it sends the document from memory.
This means you do not have to wait for the fax to finish sending before you can retrieve your original
document.
You can send up to 21 A4-size pages at a time with Memory Sending (based on the FAX Standard
Chart No.1- standard resolution).
¶ If the memory becomes full while scanning your document, MEMORY FULL is displayed on the
LCD. If this should happen, you may need to open the operation panel to remove the document. See
Clearing document jams, p. 62. Then try dividing the document into several sections and sending each
section individually, or send using Direct Sending or Manual Sending. See p. 57.
The definition of an A4-size page for memory storage purposes is based on the Canon FAX Standard
Chart No.1.
1
Feed the document face-down into the
Automatic Document Feeder (ADF).
See Loading the document, p. 49.
You can set the resolution and density. See p. 51.
2
Press [Function].
Wait a second for TEL REGISTRATION to
appear.
3
Press [Send Options].
Press [Start/Copy].
4
Dial the other party’s fax number.
Use one of the dialling methods described earlier in
this chapter. See p. 56.
5
Press [Start/Copy].
The fax scans the document into memory and
begins sending.
STANDARD
Function
SELECT MENU
1 sec.
TEL REGISTRATION
Send Options
Start/Copy
MEMORY TX
TEL=
TEL= 9876543333
Start/Copy
TX/RX NO.
1 sec.
MEMORY INPUT P01
XXXX
SENDING DOCUMENTS
55555555555555555555555555555555555555555555555555555555
59