Canon FAX-L400 Fax Machine User Manual


 
4-9
Sending Faxes
4
4
Press Start to begin scanning for sending.
The machine begins calling the other party after all documents are scanned into the memory.
When you use speed dialling, scanning starts automatically without pressing Start when the TIME OUT setting
is on. (p. 10-6)
To cancel sending after dialling has started, press Stop/Reset 4 (–). ( p. 4-11)
You can scan a document up to 1 m long.
You can load up to 50 pages of A4-size paper in the ADF.
After the machine finishes scanning the document into memory, it returns to standby display. At this
point, you can make the next reservation. You can make up to 20 reservations.
Using the Platen Glass
When documents are loaded in the ADF, the machine scans them. You need to remove documents from
the ADF in advance, in order to fax from the platen glass.
You can operate Book Sending, Space, Delete or Clear after pressing Function key.
When you fax an A5-size document, align the long side of the document with the left side of the platen
glass. In this way, the A4 marks on the platen glass correspond to the edges of the long side of the
document.
1
Press FAX to set to Fax mode.
Ex:
2
Prepare the document and place it face down on the platen glass. ( User’s Guide)
To adjust the resolution pp. 4-1, 4-2.
To adjust the scanning density p. 10-4.
3
Press Function Book Sending.
4
Press 4 (–) or e (+) to select the document size.
Ex:
5
Press OK.
BOOK TX SCAN SIZE
A4
03/12 2002 TUE 15:11
FaxOnly STANDARD
NOTE
NOTE