Filter
Top Products
Dialing an Overseas Number (With Pauses)
4-14
Sending Faxes
4
Dialing an Overseas Number (With Pauses)
When you dial or register an overseas number, you may need to insert a pause
within the number.
1
Place the document on the platen glass or load it in the ADF ➞
press [FAX].
For details on the types of documents you can fax, their requirements, and how to
place or load documents, see Chapter 3, "Document Handling," in the Basic Guide.
NOTE
If sending an A5-size document, align it with the A4-size marks on the platen glass, or
adjust the slide guides to the A4 width and load the document in the ADF. Otherwise, the
recipient will not receive the whole document.
2
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality
(Fax Resolution)," on p. 4-5.)
• Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Scan
Density)," on p. 4-6.)
3
Use the numeric keys to dial the international access code.
For details on international access codes, contact your local telephone company.
NOTE
If you enter a wrong number, press [ ] to delete the last digit. Or press [Clear] to delete all
the digits you entered.
4
If necessary, press [Pause] to enter a two-second pause (,).
For a longer pause, press [Pause] again for another two-second pause. Alternatively,
you can change the length of the pause. (See <1. PAUSE TIME> of "Menu
Descriptions," on p. 8-6.)
Ex:
TEL= 0,